OKBNeftegazdiagnostika
Contact us ↗RU

International research

Magnetic, virtic or ultrasonic control CRA: How to separate tasks

A multilayer corrosion resistant tube requires a monitoring map: what is the method for liner, main metal and geometry?

Technical analysis · OKB editorial team5 min read
An explanatory chart of the OKB. The experimental data are provided in the source.
An explanatory chart of the OKB. The experimental data are provided in the source.

What the Source of First Source Discussion

Johannes Koyter, in a 2014 ROSEN report, reviews magnetic, vortex and ultrasonic methods for corrosion resistant pipes. The work shows that the choice of technology depends on the material and the way in which the walls are connected. The authors recommend individual evaluation of applicability and testing on the relevant samples.

The historical limitations of specific technologies in work should be read with reference to the date. For our review, the main — Choice methodology: each layer and type of damage needs its own physical observation channel. The combination of instruments does not automatically make the measurement complete.

First, make a design map

The carbonic carrier wall and the protective inner layer perform different functions. Their damage may have different meanings and be shown in different ways in the signal. Therefore, the description of the object must distinguish between materials, thickness, connection and the transition between the structures.

Special attention is needed for welding and local restoration of the protective layer. They can change the surface, magnetic properties and acoustic path. If the analysis program involves a homogeneous tube, the design characteristic can become a false anomaly. The technology must be linked to the measuring record so that interpretation takes into account the actual object's device.

Which limits magnetic measurement

MFL is related to magnetizing the Ferromagnetic part of the wall. The presence of a non-magnetic layer changes the distance between the sensor and the controlled metal, as well as the conditions for signal formation. Therefore, characteristics obtained on a regular pipe cannot be carried out without verification.

Even when a metal loss is detected in the bearing layer, sensitivity to the small internal ulcer of the protective alloy may be different. The technical description shall clearly indicate the material under control. The phrase "CRA control MFL" without layer separation conceals the fundamental question: what kind of anomaly is the instrument capable of recording and measuring.

Role of windmill channels

The wind-freight measurement is sensitive to electrical conductivity, magnetic permeability, geometry and distance to the surface. This allows useful tasks to be performed, but makes interpretation dependent on material and the exclamation regime. The same signal may change because of a defect or a gap.

Development requires frequency selection, sensor configuration and separation of the barriers. For a thin inner layer, it is particularly important to understand the sensitivity and contribution of neighbouring metal. A flat sample test is useful, but the curve of the pipe and the movement of the host may require additional expertise in real geometry.

Opportunities and limits of ultrasound

Ultrasound provides information on the time of distribution and reflections from borders. With a good acoustic path, it allows you to measure thickness and analyse non-faults. However, mechanical contact of layers, gap, melted surface and material structure can change the availability of reflections.

The selection of ultrasonic channel should take into account the transportable environment and the acoustic interface. It is not enough to add a converter to the existing body: the position and quality of the signal need to be ensured. It is useful to distinguish between the absence of a detected anomaly and the lack of an appropriate acoustic path. These situations have completely different engineering meanings.

Uniting methods without false certainty

Several channels are useful if their sensitivity is indeed complementary. Two methods that depend on the same gap can be wrong at the same time. Therefore, the independence of measurements cannot be inferred from different technology names only.

The merger starts with a common coordinate system, surface maps and uncertainty descriptions. Then, for a specific area, physical compatible features are compared. The contradiction between channels is a cause for analysis, not an inconvenience that needs to be smoothed out by average. Sometimes it's the discrepancy that shows a layer damage or contact failure, not noticed in a single report.

What a convincing qualification looks like

We need samples of known damage in each of the layers of interest, including situations without defect but with modified contact or roughness. The program shall check not only the detection but also the correct classification: which surface and material the signal refers to.

It is useful to describe in advance the criteria for success and the limits of the extraction. The test of one gauge thickness does not automatically confirm the full range. When replacing material, frequency, medium or algorithm, it is necessary to evaluate which previous evidence remains applicable and which need to be supplemented by new experiments and calculations.

OKB Engineering Comment

For us, the value of such analysis lies in the relationship between material science, circuitry and the design of a sensitive node. The correct channel starts with the question of the value observed. Then there are requirements for electronics, sensor mechanical position and the program interpretation model.

The useful result of such analysis — A layer observation map linked to sensor configuration. For each channel, it shows the working range of gaps, the influence of material and signs of loss of credibility. The map can select reference samples and determine which design changes require recalculation or additional testing.

Engineering output

A layer matrix is useful for a multilayered pipe — damage — method — The test is not a list of technologies without limits of applicability.

Sources and further reading

The article was originally written in Russian. It summarises the cited sources. For the original text and illustrations, consult the publications listed below.