OKBNeftegazdiagnostika
Contact us ↗RU

International research

Complex pipeline: How to divide inspection into verifiable restrictions

ROSEN approach to difficult lines helps separate access, movement and measurement — Three conditions for a successful survey.

Technical analysis · OKB editorial team5 min read
An explanatory chart of the OKB. The experimental data are provided in the source.
An explanatory chart of the OKB. The experimental data are provided in the source.

What is suggested in the publication

The 2015 ROSEN report addressed complex pipelines through a combination of access, geometry, driving forces and affordable measurement methods. The authors cite examples of different platforms and procedures rather than searching for one universal instrument. The important idea of the source is that the difficulty of the survey is determined by the whole system of conditions.

This approach is useful for the developer as a way to formalize the task. The presence of a magnetic or ultrasonic module does not in itself mean that it can be delivered to the right wall, returned and available data on all areas of interest.

Access begins before pipeline

The dimensions of the chamber, loading capacity, mass of the instrument and the trajectory of movement to launch may limit the project at least as much as the diameter of the pipe. The device that undergoes internal withdrawal is sometimes not safe to place in an existing cell or to be serviced on a site.

Therefore, the analysis begins at the site of the assembly and ends with data extraction and unloading. Information is needed on the length of available space, support, accessions and sequence of operations. This is not a minor logistics that can be added after the design has been completed, but the basic conditions of layout, break-ups, selection and maintenance.

Several measurements are made

The minimum inside diameter is only one characteristic. The length of the narrowness, radius and sequence of withdrawals, the distance between them, the crossings, the tributaries and local projections are important. The long rigid unit and the short flexible section can pass through the same area differently.

The model shall take into account not only the instrument shell but also the extreme positions of sensors, cuffs and joints. The geometrical passage is not yet proof of the measurement capability: the carrier may be so positioned that the sensors temporarily lose position. Therefore, the reference and measurement ranges should be asked separately.

No one can describe traffic by one flow

Movement is influenced by pressure variations, friction of the cuff, magnetic pull, slope and properties of the transport medium. The average flow rate does not show the risk of local acceleration or stoppage. When driving in gas, there is a significant compressability and a complex profile — The accumulation of liquid.

The calculation should cover the worst combination of conditions and the scenario of restoring the regime under control. If a traction transmission or cable is used, the limits on clutching, bending and resistance of the long line are added. The method of movement is decided with the choice of the measurement load, not after it.

The method is selected to be a visible threat

The tasks of detecting metal loss, measuring geometry and searching for cracks differ. It is necessary to determine what damage is actually expected and what quality of data is required for its evaluation. The universal expression "full diagnostics" prevents verification of the results.

A matrix is useful: type of anomaly, available method, size range, working conditions and way of validation. It immediately shows the areas where one canal does not answer the question. The additional method may close the gap, but its compatibility with the host, environment and reference system shall be checked separately.

Test route instead of ideal stand

The bar for a complex line should reproduce critical combinations of elements, not just each element separately. Two close challenges may be more difficult than the sum of two single checks. The same applies to the narrowing before turning and to the sensor passage after a deformed cuff.

The test shall record the forces, the position of the modules, the signal quality and the post-pass condition. Successful extraction does not mean that there is no damage to the cable or loss of part of the data. Therefore, the acceptance criteria include a functional pre- and post-test check and an analysis of recording at the most loaded sites.

How to manage unknown data

The old pipeline rarely has a fully reliable digital model. Some of the dimensions are known from the drawings, part confirmed by the survey, part remains a guess. If these categories are mixed, the calculation becomes false accuracy.

Each critical parameter is useful in identifying the source and degree of confidence. The following are determined which unknowns can be closed by the preliminary check and which will require a design reserve. This arrangement helps to focus efforts on truly dangerous uncertainties. The change of one confirmed size may be more important than the long-term optimization of a noncritical piece of instrument.

OKB Engineering View

For a design office, the system approach means linking mechanics, sensitive elements, nutrition and software registration in one model of requirements. Then the compromise becomes visible: the passage can change the coating, the increase in the number of sensors — Mass and energy consumption.

The requirement model shall show which node is responsible for each criterion and the test it is tested. Then the change in cuffs, section length or frequency can be estimated by the effects on the whole complex. This traceability helps to maintain consistency of design during design, construction, assembly and subsequent verification.

Engineering output

The complex inspection becomes manageable when the access, movement and quality of measurement have separate verifiable criteria.

Sources and further reading

The article was originally written in Russian. It summarises the cited sources. For the original text and illustrations, consult the publications listed below.