OKBNeftegazdiagnostika
Contact us ↗RU

Data and research

Intensive deformed state: how survey and calculation are related

What is the measurement of the pipeline and what are the baseline data for evaluating strength?

Technical analysis · OKB editorial team2 min read
OKB schematic illustration. Dimensions and loads are illustrative.
OKB schematic illustration. Dimensions and loads are illustrative.

What describes the state of construction

Tensions characterize internal effort in material and deformation — Change its shape and size. The condition of the pipeline depends on pressure, temperature, bending and securing conditions. The submersible area also has a top profile and possible free flights.

What information the survey provides

Geometric measurements and defects shall specify the description of the actual pipe. However, the profile of a pipe or magnetic signal does not per se provide a complete stress distribution. The material properties, loads and conditions of interaction with the environment are also necessary for calculation.

Inspection experience informs tool design

OKB is developing registration equipment and systems. Research and Technology Centre «Neftegazdiagnostika" The parent company works on the survey and assessment of the condition of the facilities. In such a bundle, it is important for the developer to understand what information the specialist will need for further analysis: the defect position, its geometry and the data acquisition conditions.

Engineering output

Measurements should be linked to the location and conditions of the survey. This allows them to be used as verified reference data for engineering analysis, rather than being limited to a separate image of the signal.

Sources and further reading

The article was originally written in Russian. It summarises the cited sources. For the original text and illustrations, consult the publications listed below.