OKBNeftegazdiagnostika
Contact us ↗RU

Inspection system design

Magnetic, ultrasonic and virretical methods

A brief guide to the physical principles that are found in technical publications.

Technical analysis · OKB editorial team1 min read
Measuring equipment · Illustrative photo, Ludovic Delot / Peccels.
Measuring equipment · Illustrative photo, Ludovic Delot / Peccels.

Magnetic inspection

MFL is used to record signs of metal loss in steel facilities. The magnetic response is analysed taking into account the design of the system, the shape of the anomaly and the conditions of passage.

Ultrasound and EMAT

Ultrasound methods are used to measure thickness and detect non-faults. EMAT means an electromagnetic-acoustic converter: ultrasound is generated by electromagnetic means. This method allows acoustic waves to be triggered without liquid contact medium.

Wind-smart method

Varytectic control is based on electromagnetic induction. It is used for electrical conductive material research and for measuring the distance between sensor and surface. The function depends on the specific performance of the sensor.

Engineering output

There is no universal method for all types of damage. This overview explains the industry terms; listing methods does not mean that each of them is part of the OKB.

Sources and further reading

The article was originally written in Russian. It summarises the cited sources. For the original text and illustrations, consult the publications listed below.