OKBNeftegazdiagnostika
Contact us ↗RU

Magnetic inspection

MFL and TFI: Why change the direction of magnetic field

How the orientation of magnetation relates to the form of the anomalies being detected.

Technical analysis · OKB editorial team2 min read
Assembling an inspection instrument in the OKB workshop
Assembling an inspection instrument in the OKB workshop

What a magnetic inspection tool measures

The magnetic system creates a flow in the steel wall of the pipe. In the area of metal loss, field distribution changes. Sensors record this change and processing links the signal to the position and expected size of the anomaly.

Axial and circumferential magnetisation

The field is oriented along the axis of the pipe when applied longitudinally. In the transverse pattern — It's a circle. The technical literature contains the symbols MFL-A and MFL-C. The term TFI is used to control the cross-glazed magnetic field. The specific systems should be compared to the device and specification, not just to the reduction.

Why One Direction Is Not Enough

The answer depends on the mutual orientation of the field and the anomaly. A long, narrow metal loss along the pipe may require lateral magnetization for a more reliable characteristic. Therefore, it is important to take into account the orientation and shape of the expected defects in the configuration.

Engineering output

The title of the method does not replace the description of its scope. The field direction, the shape of the anomaly and the measurement conditions are considered together.

Sources and further reading

The article was originally written in Russian. It summarises the cited sources. For the original text and illustrations, consult the publications listed below.