OKBNeftegazdiagnostika
Contact us ↗RU

Geometry

Pipe profile and track coordinates: different measurement tasks

What the caliper tool shows and how its data differ from navigation reference.

Technical analysis · OKB editorial team1 min read
GEO 530 on the assembly trolley
GEO 530 on the assembly trolley

Internal

Mechanical caliper tool monitors the movement of measuring levers when a pipe passes. These data describe changes in the internal profile: dents, obsolescence, constrictions and other geometric features.

Position on the track

The profile answers the question about the shape of the section. Navigation system solves another task — determines the spatial position of the pipeline. The internal inertial system and the linking of measurements allow geometrical features to be compared with the track.

Why supplement the contact sensor?

In industry complexes, mechanical levers can be combined with vortex-based distance sensors. In the RoGeo XT ROSEN line, this approach is used to distinguish between the geometry of the metal wall and the effects of sediment. This is an example of combining methods, not a description of all caliper tools.

Engineering output

Geometric monitoring and mapping complement each other. The presence of a caliper tool does not in itself mean the existence of a coordinate navigation.

Sources and further reading

The article was originally written in Russian. It summarises the cited sources. For the original text and illustrations, consult the publications listed below.